Atos Vane Pump PFE-52110/3DW 32

Installation position
Any position
Axial and radial loads are not allowed on the shaft.. The coupling should
Loads on the shaft
be sized to absorb the power beak.
From -20°C to +70°C
Ambient temperature
Fluid
Hydraulic oil as per DIN 51524…535; for other fluid see section一
Recommended viscosity
Max. at cold start
800 mm2/s
100 mm2/s
Max. at full power
24 mm2/s
During operation
10 mm2/s
Min. at full power
ISO 19/16
Fluid contamination class
-20°C+60°C
Fluid temperature
-20°C+60°C (/WG seals) -20°C+60°C(/PE seals)
Recommended pressure on inlet port
From -0.15 to 1.5 bar for speed up to 1800 rpm, from 0 to +1.5bar for
speed over 1800rpm