Char-Lynn (Danfoss) Hydraulic Motors 193-0257-001

Series：2000 – 2-Speed – Wheel；
Shaft Type：Splined；
Displacement：9.65 in³/r；
Mounting Type：4-Bolt Flange – 4.25 in Pilot；
Port Orientation：Staggered Ports；
Output Shaft Size：1-1/4 in 14T Spline；
Drain Connection Size：.5625-18 Unf-2b O-ring Port Size -6；
Actual Mounting Flange：4-Bolt Flange – Wheel – With 4-1/4 In. Pilot Dia.；
Maximum RPM-Continuous：280 rpm；
Replacement Wear Place：001 Design – 22026-000 – 1 Required；
Replacement Drive Valve：001 Design – 8433-000 – 1 Required；
Replacement Plate Valve：001 Design – 21722-000 – 1 Required；
Replacement Balance Ring：001 Design – 21601-000 – 1 Required；
Replacement Rear Housing：001 Design – 21602-001 – 1 Required；
Max Operating Temperature：180 °F；
Replacement Buna Seal Kit：001 Design – 61267-000 – 1 Required；
Replacement Viton Seal Kit：001 Design – 61274-000 – 1 Required；
Operation Rating Description：Continuous Rating – Motor May Be Run Continuously At These Ratings. / Intermittent Operation – 10 Percent Of Every Minute / Peak Operation – 1 Percent Of Every Minute；
Max System Operating Temperature：-34°C to 82 °C；
Replacement Valve Sold Separately：001 Design – 23047-000 – 1 Required；
Rplc Output Shaft And Bearing Kit：001 Design – 21618-004 – 1 Required；
Replacement Long Cap Screw Cap End：001 Design – 14384-012 – 4 Required；
Replacement Drive – Sold Separately：001 Design – 21371-004 – 1 Required；
Replacement Housing Bearing Side Fnt：001 Design – 21578-003 – 1 Required；
Replacement Geroler – Sold Separately：001 Design – 21625-004 – 1 Required；